Artificial intelligence for the change of slide rail production

The trend of artificial intelligence is becoming more and more intense in the world. The level of artificial intelligence in China and the United States all over the world ranks first in the world. According to the statistics released by the Prospective Industry Research Institute in the "Analysis Report on Market Prospects and Investment Strategic Planning of Artificial Intelligence Industry", the scale of China's AI market in 2017 was 21.69 billion yuan, up 52.8 from 2016. It is estimated that the scale of China's core artificial intelligence industry will exceed 150 billion yuan in 2020, drive the scale of related industries to exceed 1 trillion yuan; in 2030, the scale of core industries will exceed 1 trillion yuan, driving the scale of related industries to exceed 10 trillion yuan. Even in the production of furniture hardware slides, intelligent manufacturing is about to be used, and all aspects of slide production are completed by automated robotic arms. The first step in the production of steel ball slide will use automated production equipment, a roll of cold rolled steel through the machine to enter the beginning, through the middle of a number of links of mechanized production, and finally form a semi-finished steel ball slide. In addition, the plastic parts in the production of steel ball slides require an injection molding workshop. If the equipment is manually operated, the accuracy is slightly deviated. However, if intelligent mechanical operation is adopted on a large scale, the yield of plastic parts will be greatly improved. Under the production mode of intelligent manufacturing, not only the burden of the enterprise itself is reduced, the yield is improved, but also the output and efficiency are improved, so that the assembly accuracy of the production slide is also on a higher level. It is foreseeable that more and more hardware production companies will adopt automated production in the production and processing links to create better and better products for customers.

2021-06-19

How to maintain furniture hardware

When using furniture at ordinary times, the maintenance of hardware is a problem that can not be ignored. The following is a brief introduction to the maintenance methods of common hardware at home: 1. Slide rail maintenance: add lubricating oil regularly, and wipe it with a dry soft cloth if it touches water. From time to time, check whether there are any small particles on the slide rail, and clean them up in time to avoid damage to the slide rail. 2. Hinge Maintenance Hinge is one of the necessary hardware for the cabinet body and door panel to be joined and repeatedly opened and closed. Since the opening frequency of the door panel is the highest during use, the quality of the hinge is particularly important. Keep the cabinet dry, avoid hinges and other hardware in the humid air; every 2-3 months can be regularly add some lubricating oil, gently wipe with a dry soft cloth; if found that the surface is difficult to remove the black spots, can be a little kerosene wipe, do not use chemical containing detergent or acidic liquid cleaning. 3. Handle maintenance as an auxiliary family cabinet push-pull components, handle materials have a variety of, such as wood, stainless steel, zinc alloy, iron, aluminum alloy, etc., there are also a few crystal plastic. Because the handle is often pulled, it is easy to loosen over time. Check the tightness of the screws regularly, and replace them with new ones if they fall off. Be careful not to put wet towels on the handles. Wooden handles are easy to get wet, and iron or copper handles are easy to rust and paint. 4. Skirting board maintenance of wooden skirting board maintenance should pay attention to keep the cabinet area dry, avoid the damage of wet environment to the skirting board, and regularly wax or apply waterproof agent for maintenance. The metal skirting board should prevent the sharp objects from being scratched, and the PVC skirting board can only be replaced as soon as it is cracked.

2021-06-19

Characteristics and Usage of Rebound Slide

Features: 1. Rebound: new design scheme can be realized without handle. 2. Three sections: can be pulled out completely. 3. Bottom support: hidden installation, which can leave a small installation distance, and the hardware is not exposed. The rebound slide can completely pull out the inner rail. The installed slide rail is difficult to see from the outside, so it will not affect the appearance of the cabinet. Simply press the front panel to open the drawer. Therefore, there is no need for a handle or gripper, and the cabinet looks flat and tidy. The amount of pressing is small, even if you hold items in both hands, you can easily open the drawer by slightly pressing the front plate with your elbow. The drawers can be easily removed. The press opening device is built into the slide rail, which is the same as the previous slide rail, and the installation is simple and convenient. Note: Do not close the drawer violently or impact it violently. Otherwise, the drawer may be accidentally damaged. Do not slam open or pull out the drawer when closed. Otherwise, damage to the rails can occur. Installation: First of all, there must be a product drawing of the steel ball slide rail. According to the slide rail drawing, the clearance required to install both sides of the slide rail is given. Generally, the left and right installation clearance of the 45m wide rebound slide rail is about 13.3mm. It should be noted that the installation of the rebound steel ball slide rail needs to reserve space for the drawer to touch the rebound. 2. Determine the screw hole position according to the fixed rail (outer rail) given in the manufacturer's drawings (there are all kinds of slide rails in the market, and basically the steel ball slide rail hole positions produced by each manufacturer are different, so it should be processed according to the drawings of the slide rail manufacturer you purchased). According to actual requirements, those with less personal consumption can be punched manually, and those with a large amount of furniture can be punched mechanically. The scribing method can also be used for positioning. 3. After the drilling is completed, pick up the slide rail and pull out the movable rail (inner rail) with hand, separate it from the fixed rail (outer rail), lock the two fixed rails (outer rails) to the side plates on both sides of the cabinet body with screws according to the hole positions, and then lock the two movable rails to the side plates on both sides of the drawer according to the hole positions. 4. After completing the above steps, then align the ends of the movable rails (inner rails) on both sides of the drawer side panel with the ends of the fixed rails (outer rails), and then gently push them inward to clip the movable rails to complete the installation of the rebound steel ball slide rails.

2021-06-19

Why does stainless steel slide rail rust?

Stainless steel slides are generally made of 304 stainless steel or 201 stainless steel. Stainless steel has the characteristics of corrosion resistance, oxidation resistance, easy processing, high hardness, and good ductility. It is widely used in all walks of life, but stainless steel will rust over time. This is not a quality problem, but caused by the use environment! So why does the stainless steel slide still rust? This is because stainless steel can resist part of acid, alkali and salt corrosion in dry air, and can prevent rust to the general humidity of the air. However, it is easy to rust in coastal cities where the air contains a lot of salt spray, because stainless steel is an extremely thin, strong, fine and stable chromium-rich oxide film (protective film) formed on its surface to prevent the continuous infiltration and oxidation of oxygen atoms and obtain the ability to resist rust. Once there is some reason, this film has been constantly destroyed, the oxygen atoms in the air or liquid will continue to penetrate or the iron atoms in the metal will continue to separate out, the formation of loose iron oxide, the metal surface will be constantly corroded. There are many forms of damage to this surface film. The following are common in daily life: 1. The surface of stainless steel contains dust containing other metal elements or attachments of heterogeneous metal particles. In humid air, the attachments The condensed water between the object and the stainless steel connects the two into a micro-battery, causing an electrochemical reaction, and the protective film is damaged, which is called electrochemical corrosion. 2. Stainless steel surface adhesion of organic juice (such as vegetables, noodles soup, phlegm, etc.), in the case of water and oxygen, constitute organic acid, long time organic acid on the metal surface corrosion. 3. Stainless steel surface adhesion contains acid, alkali, salt substances (such as the decoration of the wall of alkaline water, lime water splash), causing local corrosion. 4. In the polluted air (such as the atmosphere containing a large amount of sulfide, carbon oxide and nitrogen oxide), the condensed water forms sulfuric acid, nitric acid and acetic acid liquid points, causing chemical corrosion.

2021-06-19

Comparison of Damping Slide and Ordinary Slide

In recent years, China's national strength is growing day by day, the people's life is getting better and better, and the pursuit of products is getting higher and higher. The slide rails in furniture products are now beginning to pursue a better experience. Damping slide rail The damping slide rail slows down the speed, reduces the impact force, and has a gentle effect when it is closed. Even if you push the drawer hard, it will gently close, ensuring perfect and quiet movement. For home life has played a embellishment of life. Damping slide principle: Through the hydraulic cylinder, there is oil in it. When the slide is facing extreme closure, it forms resistance and has a buffering effect. There is also air pressure. The principle of this air pressure is similar to hydraulic pressure, but it is oil. Changed to air. Damping slide rail structure: fixed rail, middle rail, movable rail, ball, clutch and buffer. The buffer is installed in the fixed rail; the buffer includes a piston rod, a shell, and a piston. The piston is provided with a through hole and Hole, when the piston rod drives the piston to move, the liquid can flow from one side to the other through the through hole, thereby playing a buffering and damping effect. Ordinary slide rail ordinary slide rail has no hydraulic cylinder or cylinder compared with damping slide rail. When purchasing, attention should be paid to quality and fullness of steel balls. During installation, horizontal installation should be adjusted. One side is high and the other side is low. During use, one side is not allowed to be opened and closed frequently. Some businesses exaggerate the data when publicizing the slide rail, saying that the life of the slide rail is very long, more than 100000 times (100000 times), but in fact, the life standard of a pair of slide rail in the industry is about 50000 times (50000 times).

2021-06-19

The thickness of slide material directly affects the quality of slide rail

In the slide rails in the hardware industry, the material thickness of the three-section slide rails commonly used in ordinary drawers is generally 1.0*1.0*1.2mm, and the higher-grade slide rail is 1.2*1.2*1.4mm. This is the thickness of the standard three-section slide rail, and the thickness of the heavy-duty three-section slide rail will be thicker. However, some slide rail manufacturers, in order to save the cost of the slide rail, have produced 0.8mm, 0.7mm or even 0.6mm material thickness of the slide rail. When the thickness of the slide rail is thinner, its load-bearing capacity will be lower. The thickness of the material will not only affect the load-bearing capacity of the slide rail, but also directly affect the quality of the slide rail. If the material is too thin, the overall effect and quality of the slide rail will be reduced. So in the choice of hardware slide rail, do not in order to save a little bit of cost and let the quality of the whole product is affected, because of small losses!

2021-06-19