Home page

Characteristics and Usage of Rebound Slide

Release time:

2021-06-19

Features: 1. Rebound: new design scheme can be realized without handle. 2. Three sections: can be pulled out completely. 3. Bottom support: hidden installation, which can leave a small installation distance, and the hardware is not exposed. The rebound slide can completely pull out the inner rail. The installed slide rail is difficult to see from the outside, so it will not affect the appearance of the cabinet. Simply press the front panel to open the drawer. Therefore, there is no need for a handle or gripper, and the cabinet looks flat and tidy. The amount of pressing is small, even if you hold items in both hands, you can easily open the drawer by slightly pressing the front plate with your elbow. The drawers can be easily removed. The press opening device is built into the slide rail, which is the same as the previous slide rail, and the installation is simple and convenient. Note: Do not close the drawer violently or impact it violently. Otherwise, the drawer may be accidentally damaged. Do not slam open or pull out the drawer when closed. Otherwise, damage to the rails can occur. Installation: First of all, there must be a product drawing of the steel ball slide rail. According to the slide rail drawing, the clearance required to install both sides of the slide rail is given. Generally, the left and right installation clearance of the 45m wide rebound slide rail is about 13.3mm. It should be noted that the installation of the rebound steel ball slide rail needs to reserve space for the drawer to touch the rebound. 2. Determine the screw hole position according to the fixed rail (outer rail) given in the manufacturer's drawings (there are all kinds of slide rails in the market, and basically the steel ball slide rail hole positions produced by each manufacturer are different, so it should be processed according to the drawings of the slide rail manufacturer you purchased). According to actual requirements, those with less personal consumption can be punched manually, and those with a large amount of furniture can be punched mechanically. The scribing method can also be used for positioning. 3. After the drilling is completed, pick up the slide rail and pull out the movable rail (inner rail) with hand, separate it from the fixed rail (outer rail), lock the two fixed rails (outer rails) to the side plates on both sides of the cabinet body with screws according to the hole positions, and then lock the two movable rails to the side plates on both sides of the drawer according to the hole positions. 4. After completing the above steps, then align the ends of the movable rails (inner rails) on both sides of the drawer side panel with the ends of the fixed rails (outer rails), and then gently push them inward to clip the movable rails to complete the installation of the rebound steel ball slide rails.

Features:

1. Rebound: new design scheme can be realized without handle.

2. Three sections: can be pulled out completely.

3. Bottom support: hidden installation, you can leave a small installation distance, hardware is not exposed

Rebound rail A rebound three-section slide rail that can completely extract the inner rail.

The installed slide rail is difficult to see from the outside, so it will not affect the appearance of the cabinet.

Simply press the front panel to open the drawer. Therefore, there is no need for a handle or gripper, and the cabinet looks flat and tidy.

The amount of pressing is small, even if you hold items in both hands, you can easily open the drawer by slightly pressing the front plate with your elbow.

The drawers can be easily removed.

The press opening device is built into the slide rail, which is the same as the previous slide rail, and the installation is simple and convenient.

Note:

Do not close the drawer violently or impact it violently. Otherwise, the drawer may be accidentally damaged.

Do not slam open or pull out the drawer when closed. Otherwise, damage to the rails can occur.

Installation:

First of all, there must be a product drawing of the steel ball slide rail. According to the slide rail drawing, the required clearance on both sides of the slide rail is given. Generally, the left and right installation clearance of the 45m wide rebound slide rail is about 13.3mm. It should be noted that the installation of the rebound steel ball slide rail needs to reserve space for the drawer to touch the rebound.

2. Determine the screw hole position according to the fixed rail (outer rail) given in the manufacturer's drawings (there are all kinds of slide rails in the market, and basically the steel ball slide rail hole positions produced by each manufacturer are different, so it should be processed according to the drawings of the slide rail manufacturer you purchased). According to actual requirements, those with less personal consumption can be punched manually, and those with a large amount of furniture can be punched mechanically. The scribing method can also be used for positioning.

3. After the drilling is completed, pick up the slide rail and pull out the movable rail (inner rail) with hand, separate it from the fixed rail (outer rail), lock the two fixed rails (outer rails) to the side plates on both sides of the cabinet body with screws according to the hole positions, and then lock the two movable rails to the side plates on both sides of the drawer according to the hole positions.

4. After completing the above steps, then align the ends of the movable rails (inner rails) on both sides of the drawer side panel with the ends of the fixed rails (outer rails), and then gently push them inward to clip the movable rails to complete the installation of the rebound steel ball slide rails.