19
2021-06
At present, the sliding rails on the market include roller sliding rails, steel ball sliding rails, wear-resistant nylon sliding rails, gear sliding rails, etc. regular steel ball sliding rails are composed of steel balls, inner rails, outer rails, three-section rails and middle rails. Classification of slide rail: load classification: light, medium and heavy section classification: 2-section and 3-section application classification: industrial application/household appliance application/furniture application/medical application structure of slide rail: steel balls, beads, beads, plastic parts, inner rails, outer rails and middle rails form double-layer and single-layer differential strokes: I .e. 2/3 strokes of the length that the slide rail can be drawn from the cabinet: the pull-out length is 2/3 of the total length of the slide rail. For example, the full stroke of the 2701 model means that the pull-out length is equal to the total length of the slide rail. For example, the 4501 overstroke means that the pull-out length exceeds the total length of the slide rail. For example, the two-way stroke means that the pull-out direction of the slide rail is two directions. For example, the installation gap of 2704B200: the load test of the slide rail is based on a pair of sliding tests with a length of 400mm. There is no problem, and the slide rail above 400mm will be lowered. Split method: most of the slide rails are detachable, and some customized slide rails are not detachable
2021-06-19
19
2021-06
The thickness of slide material directly affects the quality of slide rail
In the slide rails in the hardware industry, the material thickness of the three-section slide rails commonly used in ordinary drawers is generally 1.0*1.0*1.2mm, and the higher-grade slide rail is 1.2*1.2*1.4mm. This is the thickness of the standard three-section slide rail, and the thickness of the heavy-duty three-section slide rail will be thicker. However, some slide rail manufacturers, in order to save the cost of the slide rail, have produced 0.8mm, 0.7mm or even 0.6mm material thickness of the slide rail. When the thickness of the slide rail is thinner, its load-bearing capacity will be lower. The thickness of the material will not only affect the load-bearing capacity of the slide rail, but also directly affect the quality of the slide rail. If the material is too thin, the overall effect and quality of the slide rail will be reduced. So in the choice of hardware slide rail, do not in order to save a little bit of cost and let the quality of the whole product is affected, because of small losses!
2021-06-19
Contact Us
Add.: No. 6, Jiyuan Street, Shijie Town, Dongguan City, China
Tel: +86-769-8630 7638
E-mail: lienchiang@vip.163.com
Follow Us
