Home page

Basic Terms of Slide

Release time:

2021-06-19

At present, the sliding rails on the market include roller sliding rails, steel ball sliding rails, wear-resistant nylon sliding rails, gear sliding rails, etc. regular steel ball sliding rails are composed of steel balls, inner rails, outer rails, three-section rails and middle rails. Classification of slide rail: load classification: light, medium and heavy section classification: 2-section and 3-section application classification: industrial application/household appliance application/furniture application/medical application structure of slide rail: steel balls, beads, beads, plastic parts, inner rails, outer rails and middle rails form double-layer and single-layer differential strokes: I .e. 2/3 strokes of the length that the slide rail can be drawn from the cabinet: the pull-out length is 2/3 of the total length of the slide rail. For example, the full stroke of the 2701 model means that the pull-out length is equal to the total length of the slide rail. For example, the 4501 overstroke means that the pull-out length exceeds the total length of the slide rail. For example, the two-way stroke means that the pull-out direction of the slide rail is two directions. For example, the installation gap of 2704B200: the load test of the slide rail is based on a pair of sliding tests with a length of 400mm. There is no problem, and the slide rail above 400mm will be lowered. Split method: most of the slide rails are detachable, and some customized slide rails are not detachable

Classification of slide rail:

Load classification: light, medium, heavy

Section classification: two sections, three sections

Application Category: Industrial Application/Home Appliance Application/Furniture Application/Medical Application

Structure of slide:

It is composed of steel balls, beads, beads, plastic parts, inner rail, outer rail and middle rail.

There is a difference between double layer and single layer

Itinerary:

That is, the length of the slide rail that can be withdrawn from the cabinet.

2/3 stroke:

Pull out length is 2/3 of the total length of the slide rail, such as 2701 model

Full Trip:

That is, the pull-out length is equal to the total length of the slide rail, such as 4501

Overtravel:

That is, the pull-out length exceeds the total length of the slide, such as 2708

Two-way travel:

That is, the pull-out direction of the slide rail is two directions, such as 2704B200

Installation clearance:

That is, the cabinet width minus the thickness of the slide rail divided by 2

The length of the slide rail is based on the length of the cabinet, leaving about 50mm blank.

Load:

The load test of the slide rail is based on a pair of sliding tests with a length of 400mm. There is no problem, and the slide rail above 400mm will be lowered.